- Info@salechametal.com
- 9326366532 / 9833666614
- ISO 9001:2015 CERTIFIED
ASTM A213 Tube
- Home
- ASTM A213 Tube
ASME SA213 Seamless Tubing and A213 SS Welded Tubes
Standard specifications for heat exchangers, superheated vessels, and austenitic and seamless boilers are covered by ASTM A213 grade. In a variety of stress-induced scenarios, the ASTM A213 Tube demonstrates exceptional strength and exceptional corrosion resistance characteristics. Under severe pressure and temperature conditions, these sturdy tubes resist deformation easily. The standard specification for ASTM A213 Stainless Steel Tube in this grade is 3.2 mm in diameter, with an internal diameter of 127 mm and an outside diameter ranging from 0.4 mm to 12.7 mm. Generally speaking, they are separated into T5, T9, T11, T12, T22, and T91 types. The mechanical and chemical properties of the ASTM A213 Pipe are excellent. The desired qualities can be added to these pipes by processing them with hot or cold rolling properties.
Generally, the A213 grade modules are designed in two types: seamless and welded. Hot steel billets are extruded through metal to create the SA 213 Stainless Steel Seamless Tube. This makes it possible to shape the tubes to the right dimensions, which qualifies them for a variety of uses. The ASME SA213 Seamless Tubing is made with no seams or welds, giving it greater corrosion resistance. The tube has a higher strength and load-bearing capacity thanks to the pressurized vessel grade. Although the material is costly, it is favored in abrasive environments where other tubes would warp.The user is provided with an affordable solution by the A213 SS Welded Tubes. Typically, the sturdy tubes are made by rolling sheets or strips and then using standard welding techniques to fuse them into place. Unlike seamless tubes, which are only available in 24 inches, these tubes come in a variety of sizes. Please contact us if you would like a quote on these products or more information about their features.
Stainless Steel Seamless Tube Specification Chart
1/8 to 2 inch Stainless Steel Welded Tube and SS Tubing at lowest price in Mumbai, Check Dimension and Updated price list
| Grades | 304, 304L, 316, 316L |
| Form | Welded and Seamless |
| Type | Food, Decorative, Fluid and Structural |
| Length | Single Random, Double Random, Required Length |
| Wall Thickness | 0.7 To 6.0 mm |
| Spiral welded | 76.2 To 1016 mm Outer Diameter |
| Round | 4.76 To 203.2 mm Outer Diameter |
| Rectangular | 12.7 x 25.4 To 200 x 100 mm |
| Square | 12.7 To 150 A/F. |
| End | Plain End, Beveled End, Treaded |
| Processing | Cut-to-length polishing. |
| Inspection, Test Reports |
|
| Delivery Condition | Annealed and Pickled, Polished, Bright Annealed, Cold Drawn |
| Outside Finish | No.8, No.4, 2B, No.1, Mirror Finish |
Cold Drawn Stainless Steel Tube Surface Finish
Compare our price with other Stainless Steel Tube manufacturers in India, SS Thick Wall Tubes suppliers in Mumbai from 3 to 33 gauge
| Surface Finish | Exterbal Surface(OD) | Internal Surface(ID) | |||
|---|---|---|---|---|---|
| Roughness Average(RA) | Roughness Average(RA) | ||||
| ฮผ inch | ฮผm | ฮผ inch | ฮผm | ||
| EP | Electro Polish | 32 | 0.8 | 15,10,7,5 | 0.38,0.25,0.20;0.13 |
| BA | Beight Annealed | 32 | 0.8 | 40,32,25,20 | 1.0,0.8,0.6,0.5 |
| AP | Annealed & Pickled | 40 or Not defined | 1.0 or Not defined | Not defined | Not defined |
| MP | Mechanical Polish | 32 | 0.8 | 40,32,25,20 | 1.0,0.8,0.6,0.5 |
SS Thick Wall Tubes Chemical Composition
| Grdae | Carbon | Silicon | Manganese | Chromium | Phosphorus | Sulfur | Nickel | OTHER |
|---|---|---|---|---|---|---|---|---|
| 304 | 0.08 | 0.075 | 2 | 18.00 20.00 | 0.04 | 0.03 | 8.00 11.00 | ย |
| 304L | 0.035 | 0.75 | 2 .00 | 18.00 20.00 | 0.04 | 0.03 | 8.00 13.00 | ย |
| 304H | 0.04 0.1 | 0.75 | 2 | 18.00 20 | 0.04 | 0.03 | 8.00 11 | ย |
| 310 | 0.15 | 0.75 | 2 | 24.00 26 | 0.04 | 0.03 | 19.00 22 | ย |
| 316 | 008 | 0.75 | 2.00 | 16.00 18.00 | 0.040 | 0.030 | 11.00 4.00 | Mo2.00- 3.00 |
| 316L | 0.035 | 0.75 | 2 | 16.00 18 | 0.04 | 0.03 | 10.00 15 | Mo 2.00 3.00 |
| 316H | 0.04 0.10 | 0.75 | I 2.00 | 16.00 18.00 | 0040 | 0.030 | 11.00 14.00 | Mo2.00-3.00 |
| 317 | 0.08 Max | 0.75 | 2 | 18.00 20 | 0.04 | 0.03 | 11.00 14 | Mo 3.00 4.00 |
| 321 | 0.48 | 0.75 | 203 | 17.00 20 | 0.04 | 0.03 | 9.00 13 | Ti 5XC-0.60 |
| 347 | 0.08 | 0.75 | 200 | 17.00 20 | 0.04 | 0.03 | 7.00 13 | Cb + Ta 10XC-1.00 |
| 21-6-9 | 0.04 | 1 | 8.00 | 19.00 21.5 | 60 | 0.03 | 5.50 7.5 | N 0.15 0.40 |
| 416 | 0.15 | 1.00 | 1.25 | 12.00 14.00 | 0.066 | 0.15 | ย | ย |
Exhaust Stainless Steel Tube Mechanical Properties
All Sizes and wall thickness in Exhaust Stainless Steel Tube and Schedule 10 SS Tubing, Buy SS Tube at Competitive Prices in Mumbai
| Type | Item Per | Tensile Psi | Rockwell Hardness | Yield | Elongation |
|---|---|---|---|---|---|
| 304 | Annealed I 1/8 Hard | 85000 105000 | RB80 RB95 | 35000 75000 | 55 20 |
| 304L | Annealed 1/8 Hard | 80000 105000 | RB75 RB95 | 30000 75000 | 55 20 |
| 304H | Annealed | 85,000 | RB80 | 35,000 | 55 |
| 310 | Annealed | 95,000 | RB85 | 45,000 | 45 |
| 316 316L 316H | Annealed Annealed Annealed | 85000 80000 85000 | RB80 RB75 RB80 | 35000 30000 35000 | 50 50 50 |
| 317 | Annealed | 90,000 | RB85 | 40,000 | 45 |
| 321 | Annealed 1/8 Hard | 90,000 105000 | RB80 RB95 | 35000 75000 | 55 20 |
| 347 | Annealed | 95,000 | RB85 | 40,000 | 50 |
| 21-6-9 | Annealed 1/8 Hard | 100000 142000 | RB9,0 RC30. | 60000 120000 | 45 20 |
| 416 | Annealed | 75,000 | RB95 | 35,000 | 20 |
Schedule 10 SS Tubing Dimension Tolerance
| Wall Thickness | Out Diameter | Cutting Length (mm) | ||||
|---|---|---|---|---|---|---|
| Sizes(mm) | Tolerance | Sizes | Tolerance | Sizes | Tolerance | |
| Sโค3 | +14/-14 | 1.0~3.0 | 10~30 | +0.30/-0.30 | +15/0 | |
| S๏ผ3 | +12/-10 | ย | 30~50 | +0.40/-0.40 | ย | |
| ย | ย | ย | D๏ผ50 | +0.9%/-0.9% | ย | |
| โค10 | +15/-15 | ย | โค140 | +1.25%/-1.25% | ย | |
| ๏ผ10 | ย | ๏ผ140 | +1%/-1% | |||
| D๏ผ38.1 | +20/0 | D๏ผ50.8 | D๏ผ25.4 | +0.10/-0.10 | +3.0/0 | |
| 25.4~38.1 | +0.15/-0.15 | |||||
| 38.1~50.8 | +0.20/-0.20 | |||||
| 0.5~1.0 | +0.15/-0.15mm | ย | 6~10 | +0.20/-0.20 | +15/0 | |
| 1.0~3.0 | +14/-14 | 10~30 | +0.30/-0.30 | |||
| ๏ผ3 | +12/-10 | 30~50 | +0.40/-0.40 | |||
| ย | +12.5/-12.5 | D๏ผ50 | +0.9%/-0.9% | |||
| Dโฅ38.1 | +22/0 | Dโฅ50.8 | 50.8~63.5 | +0.25/-0.25 | +5.0/0 | |
| 63.5~76.2 | +0.30/-0.30 | |||||
| 76.2~101.6 | +0.38/-0.38 | |||||
| 101.6~190.5 | +0.38/-0.64 | |||||
| 190.5~228.6 | +0.38/-1.14 | |||||
| ย | +12.5/-12.5 | ย | 10.29~48.26 | +0.40/-0.80 | +6.0/0 | |
| 48.26~114.30 | +0.80/-0.80 | |||||
| 114.30~219.08 | +1.60 /-0.80 | |||||
| 219.08~457.20 | +2.40/-0.80 | |||||
| ย | +15/-15 | ย | D๏ผ12.7 | +0.13/-0.13 | +3.2/0 | |
| +10/-10 | 12.7~38.1 | |||||
| 38.1~88.9 | +0.25/-0.25 | +4.8/0 | ||||
| 88.9~139.7 | +0.38/-0.38 | |||||
| 139.7~203.2 | +0.76/-0.76 | |||||
| ย | +15/-15 | ย | Dโค12.7 | +0.13/-0.13 | +3.0/0 | |
| +10/-10 | 12.7~38.1 | |||||
| 38.1~88.9 | +0.25/-0.25 | +5.0/0 | ||||
| 88.9~139.7 | +0.38/-0.38 | |||||
| 139.7~203.2 | +0.76/-0.76 | |||||
| ย | ย | ย | 10.29~48.26 | +0.40/-0.80 | ย | |
| ย | ย | ย | 48.26~114.3 | +0.80/-0.80 | ย | |
| ย | ย | ย | 114.3~219.08 | +1.60/-0.80 | ย | |
| ย | ย | ย | 219.08~457.20 | +2.40/-0.80 | ย | |
| Sโค3 | +14/-14 | 1.0~3.0 | 10~30 | +0.30/-0.30 | +15.0/0 | |
| S๏ผ3 | +12/-10 | 30~50 | +4.00/-4.00 | |||
| ย | ย | D๏ผ50 | +9%/-9% | |||
| 0.5~1.0 | +0.15/-0.15 | ย | 6~10 | +0.20/-0.20 | +15.0/0 | |
| 1.0~3 | +14/-14 | ย | 10~30 | +0.30/-0.30 | ||
| S๏ผ3 | +12/-10 | ย | 30~50 | +4.00/-4.00 | ||
| ย | ย | ย | D๏ผ50 | +0.9%/-0.9% | ||
SS Tube Bending Radius
| Tubing Outside Diameter (OD) | Radius | Radius |
| 9.52mm, .375, โ -inch | ย | 23.8mm, .9375, 15/16-inchย |
| 6.35mm, 0.25, ยผ-inch | 14.28mm,.5625, 9/16-inchย | 12.7mm, .5, ยฝ-inch |
| 38mm, 1.5, 1 ยฝ-Inch | ย | 57.15mm, 2.25, 2 ยผ-Inch |
| 31.75mm, 1.25, 1 ยผ-Inch | ย | 50.8mm, 2, 2-Inch |
| 19mm, .75, ยพ-inch | ย | 28.5mm, 1.125,1 -โ Inch |
| 12.7mm, .5, ยฝ-inch | 38mm, 1.5, 1 ยฝ-Inch | 12.7mm, .5, ยฝ-inch |
| 25.4mm, 1, 1-inch | ย | 38mm, 1.5, 1 ยฝ-Inch |